Once your system is properly configured with all devices functioning correctly, you can install DiscJuggler.

If you are installing DiscJuggler on Windows NT/2000/XP/2003, make sure you have administrative privileges. Otherwise the installation file will not be able to change the system configuration. Ask your network administrator how to obtain administrative privileges.

To install DiscJuggler:

1. If you downloaded DiscJuggler from the Internet, locate the "setup.exe" file in your system and double-click on the "setup.exe" icon. Otherwise use Windows to navigate to the drive containing the installation disc and use the "AutoPlay" option.




2. A "wizard-like" application will guide you through the entire installation process.
   
   
   
   Note: If you are running Windows 95/98/Me/NT/2000, you may need to install the latest version of the Windows Installer runtime. This application should automatically download the updates required from our servers. In the case that is unavailable to you, please contact Technical Support or visit the Microsoft web site to obtain the latest Windows Installer update.
    

3. The setup wizard will supply a default option for most selections. At any point of the setup, you can use the "Next" and "Back" buttons to move back and forth through the entire installation process and customize the selections to best fit your needs.
   
   
    

4. Please carefully read the Software License and if you agree with all terms of the license, click the "Agree" button; this will enable the "Next" button and allow you to proceed to the Customer Information window.
   
   
    

5. Enter your name, your organization (optional), and your serial number (the edit field is case sensitive). Pressing the "Next" button to proceed with the installation. If you are installing the Demo Edition, you do not need to enter the serial number and you may leave the field empty. If you made a mistake with the serial number, DiscJuggler will run as the Demo Edition until you are able to register your serial number using the "Register DiscJuggler..." command from the "Help" menu.
   
   
   
   Note: DiscJuggler allows you to purchase licenses with support for writing to different number of drives at the same time. You can start using DiscJuggler with your existing number of writing drives and, should you later decide use more drives in your system, contact a Padus sales representative and ask to upgrade to a license of DiscJuggler supporting the number of writing drives in your system. Contact information can be found on the web at http://www.padus.com/.
    

6. Select "Complete" to perform a standard installation of DiscJuggler to the default Program Files directory and press the "Next" button to proceed to the next window.
   
   
   
   By selecting "Custom" and pressing the "Next" button, you will be able to modify the default installation directory and choose which optional components will be installed to your system.
   
   
   
   Note: DiscJuggler uses a proprietary interface to communicate with reading and writing drives. Choosing not to install this component may result in DiscJuggler not being able to find an ASPI layer to use devices on your system.
    

7. At this point all configuration options for the installation of DiscJuggler are complete. One more confirmation window is included if you previously made a mistake that you would like to change.
   
   
    

8. If you wish to change any of your previous configuration options, click the "Back" button. To continue with the installation, click the "Install" button. Setup will begin copying files and registering components.
   
   
   
   

9. Once Setup has finished installing DiscJuggler, it will report whether or not the installation was successful. Choose the Finish button to close Setup and complete the installation process.
   
   
    

10. If necessary, Setup will ask you to restart the system for all the changes to take effect. Please do so. This concludes the installation of DiscJuggler.