Introduction to Tasks - Erase CDs and DVDs
Introduction to Tasks - Erase CDs and DVDs |
|
With this task you can erase CD-RW, DVD-RW, and DVD+RW discs. If you attempt to write to a non-blank re-writable disc in the course of other tasks, you will be prompted to confirm the erasure of the disc before writing commences.
Erasing one or more discs:
Select one or more devices listed in the Destination section.
Set the desired number of discs to be erased with the "Copies" control in the Options section.
Select the desired erasure type. Please note that a "Quick Erase" will only erase the disc Table of Contents (TOC) and may allow access to previously existing data. Do not select "Quick Erase" if the disc contains sensitive data.
Press the Start button.
This task's main interface is subdivided in two panels:
|
|
|
