This sub-panel allows you to specify a location on a hard disk for creating DiscJuggler Images or to permit DiscJuggler to create the image on a local hard disk. This sub-panel also lets you choose the amount of system RAM dedicated to duplication for L2 cache. The L2 cache increases the chance that DiscJuggler will successfully duplicate discs at the writing speed specified.

Temporary Folder:

Specifies the location where DiscJuggler will store temporary disc images and files.

Work Folder:

This is where DiscJuggler will save files such as the log, disc images, and music files.

Asynchronous I/O:

A way to increase the robustness of the disc recording process is to use a portion of your RAM as an advanced Level 2 caching mechanism to buffer interruptions in the data flow. These methods cannot absolutely guarantee the elimination of buffer under-run errors. A number of other factors can adversely affect data throughput and lead to such errors.

The default cache size will vary depending on your license. Make sure you do not allocate too much memory for the L2 cache: leaving the operating system without enough memory can dramatically slow the system. The default value is appropriate for most recording tasks. Directly edit the control field or use the spin-buttons to enter a positive number between 1 and 1024.