Selecting the System panel of the Device Explorer displays information concerning the computer system configuration and DiscJuggler setup.

• CPU type

• Total and available system memory in kilobytes

• Windows edition and version

• DiscJuggler edition and version

• DiscJuggler serial number

• DiscJuggler operator's name and ID

Test Speed:

This button displays a dialog that will perform a read/write test on the selected logical drive to determine its average and minimum CD writing speeds.

To avoid potential buffer under-run problems always make sure that you the speed of the drive you are using as a source for your recording and pre-mastering data is higher than the writing speed selected. For this test to succeed on every selected drive there must be at least 20MB of available free space on each.