Writing multiple tasks to multiple drives at the same time requires extreme performance from the other system components instead of the writing drives. The most important factor is the source data and the ability to get that data to the writing drives on time.

Multi-tasking through DiscJuggler requires setting up individual data sources on their own hard disks, or shared over a Redundant Array of Independent (or Inexpensive) Disks (RAID). This requirement allows communication between each writing drive and their source hard disks to continue uninterrupted. Testing is recommended to determine the appropriate hardware necessary to meet the demand.

Please visit the Writing to Multiple Drives section of the Advanced Concepts chapter for additional information on multiple drive interfaces.

For current recommendations, please contact Technical Support or check for information on the web at http://www.padus.com/support/.